First of all, the most common connector contact problem, because this is often, there are many reasons, sometimes a small problem, so the first problem to be considered at the time is the contact problem, must occur electronic equipment failure Check all the connectors. If the connection is tight, consider other problems. If there is no internal connection problem, it can be repaired well by a simple dialing operation. Another problem that needs attention in this item is that in the process of using the protection of the connector, it is also very important because the protection is improper, the contact is sometimes poor, and we cause local damage or corrosion from the connector. This kind of bad contact situation is generally difficult to repair, need to replace the butt plug-in processing, not only a trouble, is a waste of resources and economic losses.
Another common problem with connectors is poor insulation. It also mainly indicates the influence of the external environment. The appearance of this situation is usually unstable and leaky. What is more terrible is that it may lead to unsafe factors. Use, intuitive can be observed, but such problems must stop working on the connector and replace it directly with new ones. It is also mentioned here that this is the cause of poor insulation. If there is a problem with the unqualified insulation materials, it is wrong. If we choose one of them, it is caused by environmental influences. This is caused by improper use. Protecting the poor, especially the corrosion of damaged connectors in humid environments, makes us entangled very much. This must be avoided one day to avoid more unnecessary losses, especially for leakage protection, and may involve people's safety.
There is a common problem in the connector during use, but it can be avoided by changing the installation method. In particular, it is necessary to pay attention to the rationality of installation, installation and use. This problem does not occur.
(1) A heat-resistant current connector with a maximum operating temperature of 200 °C (with the exception of some special connectors) with a minimum temperature of 65 °C. Because of the current generated by the connector at the point of contact, which causes the temperature to rise, it is generally considered that the operating temperature should be equal to the sum of the ambient temperature and the junction temperature rise. In some specifications, the maximum temperature allowed for the connector specified in the rated power flow rises.
The role of the connector in production is the role of the connection, but what is the role of the connector in other industries? In the service industry, especially in the automotive repair industry, the connectors used will bring us very Great help
